Timberk T-PAC12-P11E, Instruction Manual, Page: 39 / 64

IM2021
39
11. WIRING DIAGRAMS
12. TROUBLESHOOTING
In case of emergency, please, use the troubleshooting methods shown in table. If it is
impossible to solve problems with these methods, contact the authorized service
center.Failures and their possible reasons:
Problems Reasons Solutions
The air
conditioning
does not
work.
There is no electricity.
Turn it on after connecting it to a
socket with electricity.
The overflow indicator displays
"FL".
Discharge the water inside.
The ambient temperature is
too low or too high
Recommend to use the machine in
at the temperature of 7-35
℃
(44-95
℉
).
In cooling mode, the room
temperature is lower than the
set temperature; in heating
mode, the room temperature is
higher than the set
temperature.
Change the set temperature.
In dehumidification mode, the
ambient temperature is low.
The machine is placed in a room
with an ambient temperature of
greater than 17
℃
(62
℉
).
There is direct sunlight. Pull the Curtain.
Condenser
Compressor Evaporator
Capillary