Timberk T-PAC12-P11E, Instruction Manual

Page: 30 / 64

IM2021
30
3:Mode:
In the case of power on, press the key to switch between cooling → fan →
dehumidifying mode.
4: Up /Down : press the two keys to change the setting temperature or setting time,
operate as follows:
While setting temperature, press up key or down key to select the required
temperature (not available in fan or dehumidifying mode).
While setting time, press up key or down key to select the required time.
5:Fan:
1
）
In cooling and fan mode, press the key to select high, low wind speed operation.
But limited by anti-cold conditions, under certain conditions, it may not run according to
the set wind speed.
2
）
In dehumidifying mode, pressing the key is invalid, and the fan will forcibly choose
low wind speed operation.
6:Timer:
In the case of power on, press the key to close timing; in the case of power off, press
the key to open timing.
Press the key, when the timing symbol flashes, press up and down key to select the
required timing value.
Timing values can be set in 1-24 hours and the timing value is adjusted up or down by
one hour.
7: Sleep: In the cooling Mode, Press the UP and Fan Key to turn on the sleep mode,
then the unit will work on Energy-Saving and quiet type.
Remote control
: press the key to turn on o turn off the machine.
: press the key to set timing.
: press the key to reduce/ increase temperature and
timing set value.
: press the key to switch between cooling, fan, heating,
dehumidifying mode.
: press the key to select high, low wind speed.
: Press the key to turn on the sleep mode.
: Press the louver will swing up and down (optional).
: press to change
45 °C and °F on display.
The remote is powered by two AAA batteries (not included)