Timberk T-HG2-Q11T, Instruction Manual

Page: 19 / 20

IM2022
19
Temperature limiter parted
electrical circuit and shut off
the heating elements
Ensure that the air inlet or
outlet grille is not blocked by
foreign objects and wait for
turning on of the temperature
limiter, after the body of
the device cools down
Malfunction in circuit breaker Change the circuit breaker
Power cord is broken
Contact an
authorized service center to fix it
The room temperature is higher
than the temperature set by the
thermostat
Turn the thermostat handle
clockwise until the heaters turn on
The device is connected to
electric network, heating mode is
set, the electric motor works, but
there is no heating
Low heating temperature is set on
thermostat
Set the temperature higher on
thermostat by rotating the handle
clockwise
Temperature limiter parted
electrical circuit and shut off
the heating elements
Ensure that the air inlet or
outlet grille is not blocked by
foreign objects and wait for
turning on of the temperature
limiter, after the body of
the device cools down
Defective operation mode switch
Contact an authorized service
center
Defective thermostat
Defective heating element
The room temperature is higher
than the temperature set by the
thermostat
Turn the thermostat handle
clockwise until the heaters turn on
Unnatural sound during operation
of the fan, vibration
The fastening of the fan parts has
loosened
Fasten fan parts or contact an
authorized service center
12. UTILIZATION RULES
After the lifetime of the device expires, it should be recycled in compliance with the laws, rules and
methods in region of recycling. Detailed information about the recycling of the device, you can receive
from a representative of the local authorities, after providing full information about the device. The
manufacturer and authorized organization of the manufacturer do not carry responsibility for the
fulfillment by the Buyer of the requirements of legislation on utilization and methods of utilization of the
device selected by the Buyer. The lifetime of the device is indicated in the warranty card. Warranty period for
the device and warranty terms are specified in the warranty card. The warranty card is an integral part of the
documentation supplied with this unit. If there is no warranty card in the delivery set, ask for it from the Seller.
The warranty card provided by the Seller must conform to the manufacturer’s form.
The manufacturer and the authorized organization of the manufacturer remove responsibility for any possible
harm which can be caused to people, animals or property directly or indirectly, if this harm occurred as a
result of noncompliance with the rules and operating conditions, installation of the device, intentional or
reckless actions of the user- and / or third parties, as well as in situations caused by natural and / or
anthropogenic accidents.
13. TRANSPORTATION AND STORAGE
1. During transportation, any possible impacts and movements of the package inside the vehicle
should be excluded.
2. Transporting and storage should be provided in strict accordance to the manipulation marks.
Temperature Requirements*
Transportation and storage
From -
30°C up to +50°C
Humidity Requirements*
From 15% up to 85%
(without condensate)
We are exploring new technologies and we constantly improving the quality of our products. That’s why
specifications, design and accessories are subject to change without any specific notice.
* This product must have storage in dry, well-ventilated space of warehouse at the temperature not lower
than +5°C