Timberk Giant SWH RE5 120V, Instruction Manual

Page: 6 / 28

6
5. DELIVERY SET
1. Water heater-1
2. Plug-2
3. Safety valve-1
4. Instruction manual-1
5. Guarantee slip-1
6. Rubber packing-4
7. Packaging-1
6. WATER HEATER INSTALLATION
1. The water heater is designed for floor mounting, so it should be
installed vertically on level floor on special supports.
2. In order to reduce heat losses in pipelines, the water heater should be
installed as close to places of water use as possible.
3. For convenience of connection to water supply network, the water
heater design provides for 2 inlet and 2 outlet nozzles. Inlet nozzle «I»
and outlet nozzle «I» are situated in upper part of the water heater. Inlet
nozzle «II» and outlet nozzle «II» are situated on the left side of the water
heater (see Fig. 2). Options of possible connection of the water heater to
the water supply network are shown in Figure 4.
1 2
6 6
4
8
7
5
3
1 2
8 7
5
4
6
6
3
7
5
3
4
8
1 2
8 6
4
8
1
2
8 7
5
6
3
1. Inlet nozzle «I»
2. Outlet nozzle «I»
3. Inlet nozzle «II»
Fig . 4
4. Outlet nozzle «II»
5. Safety valve
6. Plug
7. Water inlet
8. Water outlet
4. Depending of delivery lot, there may be additional fixing of the water
heater on the wall using support arms, while connecting the water
heater to the water main with the use of upper nozzles (see Fig. 2).
5. An option of possible connection of the water heater to the water
main for several consumption points is shown in Figure 5.
1. Inlet nozzle «I»
2. Outlet nozzle«I»
3. Inlet nozzle «II»
4. Outlet nozzle«II»
5. Safety valve
6. Plug
7. Water inlet
8. Water outlet
9. T-socket*
10. Cock
1 2
6 6
4
9*
16
15
14
5
3
13 12 11
10
7
8
Fig . 5
www.timberk.com e lectric storage water heater