Timberk Giant SWH RE5 120V, Instruction Manual

Page: 3 / 28

3
ENGLISH
1. IMPORTANT INFORMATION
Please, read this manual carefully before operating the water heater.
This manual contains important information concerning your safety,
as well as recommendations for correct use of the appliance and its
maintenance. Keep this manual together with a guarantee slip, a sales
check and, if possible, carton box and packaging material. This
instruction manual describes different types of this appliance. The
water heater that you have bought may be slightly different from the
one described in the manual, which does not affect its operating
procedures.
Important safety precautions and instructions contained in this
manual do not include all the possible modes and situations. It is
necessary to understand that common sense, caution and accuracy
serve as factors, which cannot be 'built in' any product. These factors
should be considered by a person who is interested in proper
operation of the appliance. The manufacturer is not responsible for
any damages of the appliance or its parts during transportation, as a
result of incorrect installation, as a result of voltage fluctuations and if
any part of the appliance has been changed or modified.
2. SAFETY PRECAUTIONS
When using theater heaters, it is necessary to observe some safety
precautions. Improper operation due to disregard of precautions may
result in personal injury of a user or other people, as well as in
3. OPERATIONAL CHARACTERISTICS
1. Fully automatic control: automatic water heating, permanent
automatic monitoring of water temperature.
2. Two-stage protection system 3D Logic®:
DROP Defense defense against leakage and excess pressure inside
the tank (safety valve).
Defense two-level defense against overheating (thermostat
and temperature limiter).
ALL PROTECTION SYSTEMS ARE RELIABLE AND SAFE
3. Steel interior tank with special protection coating made of fine
titanium glass enamel applied in accordance with an up-to-date
method of electrostatic dry enameling. It is corrosion- and scale-
resistant. Moreover, the enamel has an increased adhesive capacity
and high plasticity (tempered at the temperature of 850
° ), which
allows it to expand or contract in case of temperature differences in
the same proportion as walls of the interior tank without formation of
microcracks, which may lead to creation of a corrosion seat.
4. Pipes of heating elements are designed with allowance for high
heat load: they are safe and reliable, with increased service life.
5. The water heater is equipped with an anode rod for protection
against corrosion of the interior tank and for decrease of scale
formation on the heating element.
6. Thickened interior urethane foam insulation allows effective
maintaining of temperature of heated water and minimizes heat
losses by decreasing of power consumption.
7. The water heater has a very simple design and is convenient in
service
Technical characteristics of the water heater are shown in Table 1
Technical characteristics
Table 1
V/Hz
A
W
Article
Unit
SWH RE5 120 V SWH R E5 150 V
I
Mpa
-
min.
kg
mm
kWh
kWh/day
Characteristic
Rated voltage
Rated current
Maximum power input
Volume
Rated pressure
Protection degree
Electrical-protection class
Heating time (at 30°C)
Appliance dimensions
(H W L )
Weight
Actual power consumption
per year
Daily losse
220/50
11,4
2500
120
0,75
IPX4
I
80
470 985 470
32,0
642,4
1,83
-
220/50
11,4
2500
150
0,75
IPX4
I
100
470 1170 470
36,0
711,75
2,02
Data from this table can be changed a bit. You can check the valid information on
www.timberk.com
www.timberk.com e lectric storage water heater