2
2.
Application
The wheelchair is designed for people who have problems with
unassisted moving and for patients with dysfunctions and reduced
mobility. This self propelled wheelchair can also be pushed by an
accompanying person. The wheelchair is suitable for indoor and
outdoor use.
3.
Assembly
UNFOLDING AND ASSEMBLY
Step 1. Unfolding the wheelchair
Place the wheelchair on the ground. Unfold the wheelchair by using
the hand grips which are at the back of the backrest. Then, press the
front and rear edge of the seat so that all the elements fit together.
Step 2. Assembly of footrests
Assemble the right and the left footrest in the front part of the frame
by placing them on two pins and turn them inwards until they are
locked.
Step 3. Adjustment of footplates
Adjust the right and the left footplate by tightening the screw which is
placed on the side of footrests with included key. Proper space should
be left between the footplates and the ground as footplates set too
low may cause difficulties in overcoming such obstructions as curb.
Adjust the footplates so that the angle between trunk and thighs is 90
0
(optimum sitting position is provided to the user, then).
Step 4. Assembly of protective strap
Put the protective strap on the footrest as it prevents user’s legs from
sliding down under the wheelchair from footplates.
Note! Do not use the wheelchair without protective strap.
