4 Connecting the ARKON Data Bridge
18
ARKON Data Bridge, SW 1.00.n, Instructions for Use (en-GB)
G.
Plug the micro USB connector
(3.b)
of the
power cable
(3)
into the micro USB port
on the device.
H.
Connect the device to the power supply
using the mains adapter supplied.
► On the ARKON Data Bridge, the green
LED for the mains power supply is
illuminated.
I.
The patient monitor set-up occurs
automatically after the data
communication between the two devices
has been established (duration: approx.
5 minutes).
► Once the data communication is
established, the yellow data
communication LED on the ARKON
Data Bridge is permanently
illuminated.
3.b
