25
8.2.2. MENU 02-02 Daily program
NOTE
:
During programming, the start-up and shut-down times of the stove must not
overlap. At least 30 minutes must elapse between switching off and on!
During daily programming, it is possible to set
two starts and two shutdowns of the
stove.
Press key 3 (set), after which the screen will display the text
menu 01 SET CLOCK
. Press
Key 5 twice, after which the screen will display the text
menu 02 SET CHRONO
. By
pressing the key 3 Key (set,) enter the timer setting menu. The screen will display text
ENABLE CHRONO
. Press Key 5 again and the screen will display the text
M-2-2
PROGRAM DAY
(Image 24).
Image 24.
Press key 3 (set) again, and the screen will display text
off m-2-2-01 CHRONO DAY
. Use
keys 1 and 2 to activate the day timer
on
(Image 25).
Image 25.
Use keys 5 and 6 to scroll through the menu, keys 1 and 2 to change parameters. The
menu layouts are shown in the following table.
The times can be set at 10 minute intervals.
