WARNING BEFORE USE
To keep your stove working properly, it is important to read this manual and strictly stick to
the instructions for use and handling.
For combustion use solid fuels such as wood and wood briquettes. It is forbidden putting
explosive devices and materials combustion chamber or the limited thermal furnace. It is
forbidden to keep flammable materials near the stove.
For proper combustion, in normal operating mode, draft in the chimney should be 10-12PA. If
the draft is greater than 15Pa, the valve should be installed in the chimney.
Room where the stove is positioned must be vented regularly for the fresh air needed for
combustion.
Some parts of stove heat up during operation and it takes appropriate precaution when
handling it. Do not allow children to handle and play near the stove.
Only spare partes reccomended and allowed by the manufacturer
should be installed on the
stove . You must not make any changes on the stove.
With first firing there might show a mild smoke, especially from the
plate’s surface. It is a
common appearance that occurs due to combustion deposits
on the plate’s surface
(corrosion protection, paint, dust, ....). The room where the stove should be vented during the
first firing.
It’s not reccomended connecting the stove to the common chimney because it can adversely
affect the required draft.
Device that uses gas as fuel must not be connected to same chimney.
During firing, use protection gloves because the door handles get heated.
National and local regulations for the installation of the furnace must be respected.
In a case of non-copliance with instructions given in this manual, manufacturer does
not take any kind of responsability for caused damage.
