M-Box NG4E User's Manual
English
2 / 36
tiko Energy Solutions AG
IM-0007-0010 Rev. 2
Safety Warnings and Working Instructions
Hazard Risk
Read the user manual before installing and operating this product!
Installation by person with electronical expertise and trained on this product
only!
Only use for current/voltage as indicated on the device label! Doing otherwise
can cause device damage and may pose an electrical shock or fire hazard!
Warnings
•
Read the installation instructions before you connect the system to its power
source.
•
To prevent the system from overheating, do not operate it in an area that ex-
ceeds the maximum admitted ambient temperature of 40 °C.
•
This product relies on the building’s installation for short
-circuit (over current)
protection. Ensure that a fuse or circuit breaker no larger than 230 VAC, 10 A is
used on all current-carrying conductors.
•
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
•
Device is intended for indoor use only.
•
Ultimate disposal of this product should be handled according to all national
laws and regulations.
•
Any usage of this device in a manner that does not conform to this manual spec-
ification can impair the provided safety protection.
Safety Instructions
Read these safety instructions carefully.
•
Follow common household electrical safety practices.
•
Disconnect this equipment from the socket before cleaning it. Do not use liquid
or sprayed detergent for cleaning. Use moisture sheet or cloth for cleaning.
•
Do not open the enclosure of this product and/or alter this product in any way.
•
The device must not be installed close to a radiator or other heat source, and
not exposed to direct sunlight.
•
Disarm main circuit-breaker (cut power), disconnect the device, re-arm circuit-
breaker, if one of the following situations arises:
