M-Box NG4M User's Manual
English
4 / 40
tiko Energy Solutions AG
IM-0004-0002 Rev. 2
Package Content
Open the package and check that you have all of the following items:
•
Instructions manual
•
M-Box (
IMAGE 1
)
•
Power cord (
IMAGE 2
)
•
Optional: Small power strip with 2 sockets (
IMAGE 3
)
•
Optional: Ethernet cable (
IMAGE 4
)
The optional items are defined in the following kits:
•
K01-GM-01.0013M-CA-ETHC2
o
no power cord (
IMAGE 2
)
o
5m Ethernet cable (
IMAGE 4
)
If any of the parts are incorrect, missing or damaged, please contact the retailer where
you made your purchase. Keep the carton box, including the original packing materials, in
case you need to return the unit for repair.
Device
IMAGE 1
shows the device.
IMAGE 2
shows various power cords for different countries.
Please note that your country’s power cord
might not be shown here.
On the rear side of the device a label is indicating
•
The manufacturer
•
The device model number (REF) and the current rating
•
The hardware (HW) and firmware (FW) version
•
The unique serial/MAC address as text and as Aztec 2D code (SN/MAC)
Installation
Installing the M-Box
Step 1
Connect the power cord to the M-Box (
IMAGE 7
) and engage the plug
in a free socket. Please see also section
Step 2
Optional (if connection to back-end via ethernet): Connect the LAN ca-
ble to your router (
IMAGE 6
).
Step 3
To
finalize the installation
, all tiko devices must be configured using the
installation app
.
