TIGMON Lauben 15BB, User Manual

Page: 18 / 84

18 |
BATTERY REMOVAL (INFORMATION FOR AUTHORIZED SERVICE PROFESSIONALS)
1. Use a screwdriver to remove the screws from the battery cover.
2. Remove the battery cover.
3. Seize the insulating tape on both sides of the battery and lift the battery.
4. Disconnect the battery from the robotic vacuum cleaner.
APPLIANCE USE
1. Turning the appliance on
You will hear 2 beeps when the robotic vacuum cleaner is switched on. In standby mode, the LED will light up blue. Once you click
the „ “ switch or the ON/OFF button on the remote control, you will hear 3 beeps and the robotic vacuum cleaner will start working.
Notes:
■
If the robotic vacuum cleaner is in stand-by mode, press the „ “ switch to wake it up. Then click the „ “ switch a second time. The
appliance will start cleaning automatically.
■
If the robotic vacuum cleaner is in standby mode for more than 15 minutes, it can only be woken up by pressing the „ “ switch.
2. Pause
To temporarily pause the robotic vacuum cleaner during cleaning:
A. Click the „ “ switch on the main body of the cleaner.
B. Or click the ON/OFF button on the remote control.
Note:
if the robotic vacuum cleaner has been paused, the user can programme it with new instructions.
3. Stand-by mode
If the robotic vacuum cleaner goes into stand-by mode, the indicator light on the display will turn off (though it is in standby mode,
it is not off).
A. The robotic vacuum cleaner will automatically go into stand-by mode if no command is received for 60 seconds.
B. Click the „ “ switch on the main body of the cleaner for three seconds to put the robotic vacuum cleaner into stand-by mode.
C. If the robotic vacuum cleaner is in stand-by mode, press and hold the button on the main body to wake up the cleaner. Pressing
the ON / OFF button on the remote control will ensure that the robotic vacuum cleaner remains awake for another 15 minutes
before going into stand-by mode.
Note:
If you do not plan on using the robotic vacuum cleaner for a longer time, turn off the main switch.
Cleaning modes
1 2
3
4
5
1. Automatic cleaning
In this mode, the robotic vacuum cleaner will automatically clean the room and adapt the cleaning mode to the particular
environment.
Note:
In standby mode, press the ON / OFF button on the remote control or the „ “ switch on the robotic vacuum cleaner to start
automatic cleaning.
DE
EN
CZ
SK
PL
HU
SL
HR