Multi-function AV Distribution System
6
3. Panel Description
3.1 EDU-TX1 Transmitter
①
SOURCE SELECT:
Blue-backlit button for source selection.
②
HDMI IN 1 LED:
Illuminates yellow when the HDMI source device is connected to
the HDMI input 2 port or green when the HDMI source is selected as input.
③
HDMI IN 2 LED:
Illuminates yellow when the HDMI source device is connected to
the HDMI input 2 port or green when the HDMI source is selected as input.
④
TO PC:
Connects to Host PC to receive USB control signal from receiver.
⑤
POWER LED:
Illuminates red when power is applied.
⑥
LINK LED:
Illuminates green when there is a valid HDBaseT connection with the
receiver. The LED is off when there is no valid link.
⑦
HDMI IN 1:
Connects to an HDMI source device.
⑧
HDMI IN 2:
Connects to an HDMI source device.
⑨
RESET:
Press this button to reboot the transmitter.
⑩
POWER/RS232:
Connects to the
POWER/RS232
port on the control panel via
CATx cable to receive RS232 control signal and power the control panel.
⑪
PoC IN/HDBT OUT:
Connects to the
HDBT IN/PoC
port of receiver by CATx
cable. The transmitter can be powered by this port once the receiver has been
powered up.
⑫
FIRMWARE:
Micro-USB port for firmware upgrade.
RESET
LINK
SOURCE SELECT
HDMI IN 2
HDMI IN 1
TO PC
HDMI 1
HDMI 2
P
oC
IN
H
D
B
T O
U
T
R
S
23
2
P
O
W
E
R
F
IR
M
W
A
R
E
5
6
10
11
4
12
1
7
8
9
2
3
