Tiger WILDCAT JD6105D, Mounting And Operating Instructions

Page: 55 / 252

ASSEMBLY
Assembly Section 2-23
SINGLE COLUMN BOOMREST MOUNTING
Carefully lower the boomrest and align the holes with those of the axle brace. Now install all
attaching hardware, as shown in the Parts Section, loosely, to allow for the alignment with the
axle brace. Tighten / torque all hardware on the axle brace and the boomrest..
(ASM-JD-0251)
MAIN BOOM INSTALLATION
Using a hoist, install the boom swivel into the mainframe as shown in the Parts Section. Line up holes
in swivel and mainframe for large swivel pin and insert pin. Secure with hardware as shown.
Attach the inner end of the main boom to the swivel bracket with the cylinder anchors positioned
upward, and at a right angle to the tractor. Secure it with the horizontal hinge pin. Secure the hinge pin in
the boss with capscrews, etc. (see Parts Section).
Attach the butt end of the main boom cylinder to the swivel with the cylinder pin and roll pins shown in
the Parts Section.
Install the travel lock on the rod end of the main boom cylinder. This should be facing the butt end of
the cylinder after installation.
Install the fittings and hoses to the main boom cylinder per Parts Section.
GREASE HINGE PIN ZERKS ON BOOM AFTER ASSEMBLY, ONCE UNDER LOAD WITH BOOM
ELEVATED, AND AGAIN AT REST WITH BOOM SUPPORTED.
(ASM-C-0013)