Tiger WILDCAT JD6105D, Mounting And Operating Instructions

Page: 117 / 252

MAINTENANCE
RSS Maintenance Section 4-17
‹$ODPR*URXS,QF
MAINTENANCE
BELT TENSION ADJUSTMENT
Locate the tensioning rod for the flail. Loosen the top tension adjustment nut. To tighten the belt, turn the
bottom tension nut to compress the spring. To loosen the belt tension, turn the tension nut up to relax the
spring. After adjustment, test the belt tension.
The tension should be 207Lbf or 106 freq cyl/sec. If the tension is as desired, turn the top tension nut down to
lock the bottom tension nut into place.
ADJUSTING RSS FLAIL CUT HEIGHT
To adjust the cutting height of the Rear Side Stow
flail head the two nuts on the roller shaft brackets
must be t aken off and moved to the desired
location/height. Be sure that both sides of the shaft
are adjusted to corresponding holes so th e shaft
remains level.