Tiger TWT-01, User Manual

Page: 4 / 6

5
All other key will be disabled when gross weight is activated.
▲: To increase values upward
in setup mode.
PRINT
：
Manually transmitting data through RS232 to computer or printer at
normal weighing mode(RS232 setup must be set at keyboard transmission 232 3 or
232 6 )
Functions keys of special kinds of scale(CWB22
、
CWT22):
PT : Press PT key, enter in the weight of the container and then put the container on
the plate. It shows the weight of the goods in the display.
HI : To set check weighing high weight:
LO : To set check weighing low weight
I/O SET : To program check weighing I/O conditions
M+/9 : Accumulation key
Press this key; it can accumulate the total weights and total times. In setting model, it
means numeric number 9. It can accumulate at most 9999 times.
RECALL/6: To display total accumulation count and total accumulated weight. In
setting model, it means numeric number 6.
MC/ 3 : Memory Clear key to clear all accumulated weight data (When the weighing
unit is changed (ex: from kg to lb), all accumulated data will be cleared automatically)
(display cursor M+ lights off). In setting model, it means numeric number 3.
SAMPLE/ 8 : press this key to enter in sample mode. In setting model, it means
numeric number 8.
COUNT/5 : Counting key. Press this key to enter in counting mode. In setting model,
it means numeric number 5.
/2 : To select “Lit. A” auto backlight, “Lit. on” backlight ON or “Lit oFF”
backlight OFF. Works as numeric number 2 in setup mode
CE : Clear key
Standard functions operate
1. Display internal value and voltage
In weighing mode
，
press and hold
【
Tare
】
key
，
and then press
【
Print
】
key
，
display
UF-1
，
and then press
【
Print
】
key
，
display internal value
，
and then press
【
Print
】
key
，
display BAT X.X,X.X which means battery voltage. Press
【
UNITS
】
key
twice to back to weighing model.
2. Check Weighing
In weighing mode
，
press and hold
【
Tare
】
key
，
and then press
【
Print
】
key
，
display
UF-1
，
and then press
【
Tare
】
key
，
display UF-2
，
press
【
print
】
key
，
display 00000L
，
set low weight
，
press
【
print
】
key
，
display 00000H
，
set high weight
。
press
【
print
】
key
，
it shows b 000 to set the condition of beeping.
The method of setting high or low weight
：
press
【
net/gross
】
key to change number,
press
【
ZERO
】
key to move cursor to left or press
【
tare
】
key to move cursor to right.
And the low weight must be less than the high weight.