Tiger TWT-01, User Manual

Page: 3 / 6

4
PIN 1: EXC+ PIN 2: EXC-
PIN 3: SIG+ PIN 4: SIG-
PIN 5: SHIELD
Counting function specification
If in unit setup mode
，
set the pieces
，
then activate counting function
，
operate specification as below
：
1. Press
【
UNITS
】
key for two seconds, it shows “0” in the display. At the same
time, the light of “PCS” is lit up.
2. Press
【
net/gross
】
key
，
it shows “10”
，
press
【
net/gross
】
key
，
choose the quantity
of the sample in turn.
3. Put the goods on the plate
，
press
【
print
】
key to confirm, it shows the quantity of
the sample in the display.
4. In counting model,
，
press and hold
【
UNITS
】
key to back to weighing model.
Remark
：
The unit weight of the sample is less than 0.2d, it can not do the sample.
Function Key:
OFF: Press and hold the OFF key, the display will show “off” for 2 seconds then
the scale will turn off automatically
ON: Turn on the scale
UNITS/ESC : Units: To select desired weighing unit.
Esc: To escape setting in setup mode.
ZERO/
◀
: ZERO: To reset the weight to 0, but the displayed weight value has to
be less than ± 2% of maximum capacity.
◀
: To move one space to the left or downward in setup mode.
TARE/
▶
：
Tare: To subtract the container weight. Maximum tare = full capacity.
◀
: To move one space to the right or upward in setup mode.
Net/Gross /
▲
：
Net/Gross: To see gross and net weight when the scale is on tare status.