![background image](http://html.mh-extra.com/html/tiger/mmp-s/mmp-s_manual_1114835002.webp)
Thank you for purchasing a TIGER Stainless Steel Mug.
Please read the instructions completely before use.
Keep these instructions for future reference.
MMP-S
MODEL
Instructions
Stainless Steel Mug
Safety Precautions
Safety Precautions
Do not use chlorine-based
bleaches or cleaner when
cleaning the product.
Do not remove the protective
sheet on the underside of the
product.
Do not attempt to add
beverage when the stopper is
still attached on the product.
Be sure to remove the stopper
before adding the beverage.
Be sure to wipe off remaining
beverage on the spout.
Keep the product upright
position all the time.
Important!
Keep out of reach of children.
Be sure to set the stopper in
proper position.
Do not fill the product above
the maximum level shown
below.
Do not store milk, dairy
products, or certain fruit juices
in the product.
Do not place the product near
stoves, open flames, or other
sources of extreme heat.
Do not use the product for any
purposes other than keeping
beverages warm or cold and
drinking.
Do not knock over, drop or
expose the product to
excessive shocks.
Do not disassemble or
attempt to repair the product
by yourself.
Do not heat the product in a
microwave oven.
Do not put dry ice or
carbonated beverages in the
product.
Be sure to clean the product
immediately specially after
sports drink.
Do not store soups or
beverages containing salt in
the product.
Do not neglect the product in
the bag.
Maximum
level
Beverage
Approx.
1cm
·
1/2-inch
Consume beverage within the
day to prevent from spoiling.
Drink slowly when the product
contains hot beverage.
Noncompliance to this
instruction may result in scald
or injury.
How to Clean
To keep your beverage warm or cool longer, pour hot (or cold)
water into the product and let it sit for one or two minutes to
allow the inside of the product to heat (or cool).
The product rattles when shaken.
This is caused by a metal sheet moving inside the product and it doesn't affect the performance
of the product. The metal sheet is used for boosting the performance of heat retention.
Clean after every use.
Use mild kitchen detergent.
Use a sponge or soft cloth.
Be sure to clean the stopper and gaskets after every use.
Attaching and Removing the gasket
Be sure to wipe off with dry cloth.
Do not use dish washer, dryer or scalder.
Specifications
Replacing and Purchasing
Consumable Parts
Before contact Tiger Customer
Service
The stopper and gaskets are consumable
parts. Check once a year for
damage/deterioration. If heavily stained or
loose, replace them.
For replacement parts, contact customer
service.
The utmost measures have been taken to
ensure the quality of this product. Should
the product be defective, however, contact
Tiger Customer Service and provide the
following information.
1. Product name
2. Model Number
3. Description of trouble
(As detailed as possible)
4. Purchase date
Feel free to send any questions or
comments about this product.
For the purpose of performance improvement, designs, specifications and parts shown in this
publication are subject to change without notice.
1
2
3
MMP-S
Heat retention has been calculated under the condition of adding hot water at 95°C ±1°C
・
203°F±2°F and
leaving it in a room temperature of 20°C±2°C
・
68°F±4°F for 1hour or 6hours.
Cold retention has been calculated under the condition of adding cold water at 4°C±1°C
・
39°F±2°F and
leaving it in a room temperature of 20°C±2°C
・
68°F±4°F for 6hours.
Capacity is actual volume that water can be stored into the product when the stopper is closed.
TIGER HANBAI (H.K.) CO.,LTD.
Rm. 1006B, 10/FI., Join-in Hang Sing Centre, 71 - 75 Container Port Road,
Kwai Chung, N.T.
Tel: (852) 2418-0912 Fax: (852) 2418-0911
JAPAN TIGER CORPORATION OF U.S.A.
2730 Monterey Street, Suite 105 Torrance, CA 90503
Tel: (310) 787-1985
Fax: (310) 787-1986
URL: http://www.japantigercorp.com/
TIGER CORPORATION
Head Office: 3-1 Hayamicho, Kadoma City, Osaka 571-8571, Japan
URL : http://www.tiger.jp/global.html
Do not open the lid when it
tilted or near face.
Tips
Tips
How to Clean
Capacity
Heat retention
Cold retention
0.2 liters / 6.8 oz
Greater than 81°C •
178°F (1hour)
Less than 10°C • 50°F (6hours)
Greater than 56°C •
133°F (6hours)
0.3 liters / 10.1 oz
Greater than 84°C •
183°F (1hour)
Less than 9°C • 48°F (6hours)
Greater than 63°C •
145°F (6hours)
Protective sheet
Stopper gasket
Stopper
Button
Lid gasket
Spout
Lid gasket
Stopper gasket
Button
Lid
Press
Unlock
Safety lock
When removing the gasket, refer to the illustrations.
Body
Be sure to set the gaskets in proper position.
Lid gasket
Stopper gasket
Lid
Stopper