Tiger CRL-A Series, Instruction Manual

Page: 13 / 40

12
English
5
Cleaning and Maintenance
Clean only after unplugging the power plug and allowing the appliance to cool.
Clean with a soft sponge or cloth.
Parts to be cleaned after every use
Pan
Grill plate
Ball plate
u
Leave to sit in warm water for a
while to remove any grime that
may have adhered.

Clean by using a sponge and a
little dishwashing liquid diluted
with warm or cool water, and
rinse it off with water.

Wipe off the water with a dry
cloth to dry the parts
thoroughly.
(Use a paper towel or similar
item when wiping the
undersides of the pan or plate
for the first time as coating may
stick to the towel.)
Caution
● Do not use harmful materials
such as thinners, cleansers,
bleach, metal scrubbers,
nylon scrubbers or chemically-
treated wiping cloths.
● Do not use hot water or put in
a dishwasher or dish dryer.
● Do not forcibly scrub the
undersides of pans or plates.
● Do not use the abrasive side
of a heavy-duty scrub sponge.
Doing so may cause the
fluoropolymer coating to peel.
Abrasive side
● When cleaning the product
using a detergent, make sure
to do so using a synthetic
household detergent for
kitchens (for dishes or
cookware) and rinse it off
thoroughly.
* Any detergents remaining on
the surface of the product
may cause degradation or
discoloration of plastic parts,
etc.
● Although the undersides of
the pan, plate and lid may
become discolored due to
foods, etc., during cooking,
this does not affect proper
functioning of the product.
Appliance
Temperature
control lever
Heat shield
plate
Heat
sensor
Heater
u
Clean the heat shield plate and
heat sensor using a cloth and
detergent diluted in warm water.
Wring the cloth firmly before
cleaning. Wipe off any remaining
detergent using a dry cloth.

Wipe the heater and temperature
control lever using a dry cloth.
Lid
u
Clean by using a sponge and a small
amount of detergent with warm or
cool water, and rinse it off with water.

Wipe off the water with a dry
cloth to dry the parts thoroughly.
Parts to clean when dirty
Power cord
[CRL-A30S]
[CRL-A30W]
[CRL-A30A]
Wipe off with dry cloth.
Caution
● Do not immerse the power
cord in water or splash water
on it.
CRL-A_manual_en-cn-tw.indb 12 2019/08/06 19:00:45