Tiger CQD-B Series, Instruction Manual

Page: 10 / 60

8
English
When using the product for the first time or after the product has been
stored for a while
Remove it from the box, and then remove its packing material and
cushioning material.
Clean the lid, the deep pan, and plates (optional accessory) with water.
(→ p.18)
When cleaning the bottom of the plate for the first time, there may be some coating there, so use a paper
napkin etc to wipe it off.
Display unit
Light
The light is on when the temperature
is being adjusted, and off when the
preset temperature is reached. The
light may go on or off depending
on the temperature control of the
cooking operation.
Temperature
control lever
Water-holding plate cover
(optional accessory)
Install on the product only when
using the grooved griddle plate.
Water-holding plate
(optional accessory)
Install on the product only when
using the grooved griddle plate.
Heater unit
Safety bracket
Does not permit current to flow
through the product when the
deep pan or a plate (optional
accessory) has not been set into
the main unit guard. (→ p.9, 13)
Temperature controller
(CQD only)
Heat insulating board
Be sure to set into the main unit
guard whenever using the product.
Heater
Do not hold directly.
Heat-sensing rod
Detects the temperature.
Main unit guard
Power cord
Plug for AC outlet
To connect to AC outlet