Tiger BENGAL JD6110-30M/R T4F, Mounting And Operating Instructions

Page: 38 / 226

ASSEMBLY
Assembly Section 2-6
APPLICATION OF LOCTITE 2047
MOWER MAINFRAME MOUNTING BOLTS
(ASM-C-LOCTITE MNT BOLTS)
All mower mainframe mounting bolts shall be secured utilizing Loctite 2047 and
torqued per the Torque Chart in the maintenance section. Shake bottle for 60
seconds before use. To prevent clogging of nozzle, do not allow tip to touch
metal surfaces during application. If tip of nozzle becomes clogged, cut off tip as
required. If female threads are contaminated or rusty, clean threads by using a
thread chaser prior to installation of bolts. Apply thread locker to threads of bolts
as shown below. The allowable fixture time is (1) hour maximum. Therefore
bolts must be torqued within this time limit. The cure time is 72 hours at room
temperature, therefore machine is not to be used in actual application, except for
function testing, until the Loctite is allowed to cure.