![background image](http://html.mh-extra.com/html/tiger/ads-a02u/ads-a02u_instruction-manual_1114831012.webp)
12
Making Coffee
Remove the cylinder unit from the main unit.
Removing the cylinder unit
→
P. 10
1
Remove the upper cylinder and lower cylinder
from the joint.
Be sure to hold the joint when turning the cylinders.
2
Use the provided measuring spoon to add coffee
grounds on top of the filter and smooth out the top.
Because the bottom of the lower cylinder is unstable, place it into the provided cylinder stand.
3
<Guidelines for adding coffee grounds>
Amount extracted
Coffee grounds
(level measuring spoons)
Water level scale
240 mL
Two spoonfuls
120 mL
One spoonful
120 mL(for iced coffee)
Two spoonfuls
Adjust the amount of coffee grounds according to your preference.
When using Dual Temp, it is recommended that you extract 240 mL.
Because there is the risk of overflowing, do not add more than two
level measuring spoons.
When you will add ice to make iced coffee after extracting the coffee, it is recommended
that you use coffee grounds that are marketed specifically for iced coffee.
Caution
y
Do not
use superfine coffee grounds.
Use medium-fine or larger coffee grounds.
Superfine coffee grounds may clog the filter, preventing operation from completing normally.
Caution
y
Do not add c
offee grounds before installing the filter into the lower cylinder.
Also do not add coffee grounds into the water pumping pipe.
Doing so may cause
coffee grounds to enter the main unit, preventing operation from completing normally.
y
Check that the water pumping pipe gasket is attached to the water pumping pipe.
→ P. 10, 17
y
Check that the water pumping pipe and filter are installed in the lower cylinder.
y
Install the water pumping pipe and filter so they are straight, and make
sure there is no gap between the lower cylinder and the filter gasket.
If there is a gap, the coffee grounds may fall through it.
Cylinder unit
Joint
Upper
cylinder
Lower
cylinder
(1) Turn
(3)
Turn
Cylinder
stand
Lower
cylinder
Water
pumping pipe
Filter
(2) Remove
(4)
Remove
Lower
cylinder
Make sure there is
no gap between the
lower cylinder and
the filter gasket.
Filter gasket
Summary of Contents for ADS-A02U
Page 23: ...23 Others MEMO 38 memo ...