Tiger Box1 Assembly Guide
Post Installation Maintenance:
22
5.
Insert the drive carrier with the spare disk into the drive bay, following the steps on
page 9.
When the HDD status LED of the drive stops blinking, rebuild the RAID, following
the steps described in the Tiger Store Administration Guide.
Important:
Make sure you order an additional spare drive in case another
RAID drive fails in the future.
Replacing a Failed Power Module
Your Tiger Box1 is shipped to you with two power supply modules, installed in the rear
of the appliance. These modules supply redundant power to Tiger Box1 - should a
power supply module fail, you can replace it while the system is operating. You can
replace a failed power module only with a power module of the same model.
To replace a failed power module:
1.
Find the failed power module (the light of its LED indicator is solid red).
2.
Unplug its power cable from the module's socket.
