Tiger Box Assembly Guide
Post Installation Maintenance:
16
Post Installation Maintenance
Cleaning the Bezel Filter
The front panel bezel features an advanced protection filter that prevents dust from
accumulating in the RAID drives and the enclosure. It is advisable to clean the bezel
filter every 3 months.
To clean the bezel filter:
1.
Remove the bezel (see steps on page 7).
The filter is snapped on the inside frame of the bezel.
2.
Take the filter off by hand and wash it under running water, then leave it to dry.
power module LED
green
solid
power supply is on
amber
solid
power supply is plugged in and
turned off, or the system is off
but in an abnormal state.
blinking
power supply temperature has
reached 63°C. The system will
automatically power-down
when the power supply
temperature reaches 70°C and
restart when the power supply
temperature goes below 60°C.
