Tiger Box Assembly Guide
Site Installation: Connecting The Appliance to The Power
9
2.
Screw the two thumb screws on either side clockwise.
Connecting The Appliance to The Power
Your Tiger Box is shipped to you with two power supply modules, installed in the rear
of the appliance. These modules supply redundant power to Tiger Box - should a
power supply module fail, you can replace it while the system is operating (see
“Replacing a Failed Power Module” on page 19). You can replace a failed power
module only with a power module of the same model.
To connect the appliance to the power supply:
1.
Plug the power cord in the power socket of the power supply module.
2.
Connect the power cord to the power outlet.
