Tiger Box 1U4 Assembly Guide
Site Installation: Install The Front Panel Bezel
12
6.
To check that the drive carrier is properly installed and makes full contact with the
drive bay, try to pull it out without unlocking the lever.
Important:
If the drive can be pulled out, repeat the steps for installing it
from the beginning.
7.
Repeat the above steps for each drive in the kit.
Install The Front Panel Bezel
Tiger Box is shipped with a bezel, which should cover the front panel.
You may have to remove the bezel in order to:
•
monitor RAID drives activity (see steps on page 19)
•
replace a failed RAID drive (see steps on page 21)
•
power on/off or restart the appliance
•
perform system restore.
Tip:
You can install/remove the bezel at any time without having to turn off
or dismount the appliance from the rack.
To install the bezel:
1.
Insert the tabs on each end of the bezel into the flanges on each side of the
appliance's front panel.
