Tiger Box 1U4 Assembly Guide
Site Installation: Install Tiger Box
8
5.
Holding the appliance, remove the foam protectors.
6.
Remove the bezel from the foam protector.
Install Tiger Box
Before installing Tiger Box 1U4 in a rack or on a table top, consider the limitations for
maximum cable lengths, when deciding on the location of the appliance within your
facility. Also check the appliance's technical characteristics to make sure that the
rack/the table meets the physical, electrical, and thermal specifications.
Rack-mount Tiger Box
You can mount Tiger Box 1U4 in a standard, 19-inch-wide, four-post rack.
A rack-mount rails kit is included in your shipping. If you are installing Tiger Box in a
rack, follow the instructions supplied in the rack-mount rails kit to install the
appliance.
Tip:
Install the heaviest devices in the lowest position in the rack. To make the
lift of Tiger Box easier, insert the RAID drive carriers after installing the
appliance in the rack.
Install Tiger Box on a Table Top
If you do not plan to install your Tiger Box 1U4 in a rack, and you opt for tabletop
installation, ensure that:
•
the surface is clean and in a safe location;
•
the appliance is stable, its bottom faces down and its top faces up.
Tip:
To determine the top and bottom of the appliance, use the text direction
on the printed labels.
•
the appliance is installed off the floor to avoid drawing dust accumulated on the floor
into the interior of the appliance by the cooling fans.
