14
If you’re entered in a bunch of functions as “password protected”, use the “ ”
arrow to see them all.
Press
QUIT
a second time. Now you’re back in the Main Menu.
Go to a section that you have password protected. Instead of the function opening,
on screen you will see
PLEASE ENTER YOUR PASSWORD.
If you type in the wrong password, you will see
INCORRECT PASSWORD.
Use the
DELETE
button to erase the incorrect password and try again!
When you type in the correct password, the function will open properly.
You can “password protect” any functions you want, even this
SECURITY SYSTEM function! When you go to “password protect”
the password (Security System), you will see a warning on screen.
This warning is important! The warning explains that if you happen to forget your
password, you are out of luck if you have “locked up” this section. In order to gain
password access, when you’ve locked up this security function, you will have to
reset your unit or take out the batteries and start all your programming for your
entire Dino Dex all over again.
So consider “password protecting” every section except the Security System
function. That way, if you forget your password and you haven’t locked up the
security system, you can go into this section and change your password!
Here’s how:
Go to SECURITY SYSTEM on the Main Menu and press
ENTER
.
On screen you will see
CHANGE PASSWORD? Y/N
Press
Y
for yes and go through the entire procedure of selecting a password again.
The sections of the Dino Dex you had previously locked up with your old password
(which you have forgotten), can now be opened with your new password.
Summary of Contents for Dino Dex
Page 1: ...Dino Dex ...