Tige Multi-sport Inboard Boat Owner'S Manual Download | Manualshive

Page: 73 / 91

background image

7-6

CARE AND MAINTENANCE

BILGE PUMP AND BILGE AREA

Check your bilge pump often to make sure it is functioning properly. The
BILGE switch can be used to test the bilge pump, by listening to hear that
the pump is operating. It may not pump water unless water is present. The
bilge pump is located in the bilge area. Keep it from getting clogged by
removing any debris you find in the bilge area. Debris can also block the
pump float from functioning or make it operate continuously. Make sure no
debris is blocking the bilge pump float.

Wash the bilge with a good biodegradable household detergent or a bilge
cleaner available at your Tigé Dealer or a marine supply store. Rinse with
water while your bilge pump is running. If your pump seems too slow, remove
the top of the pump from the base and check the impeller to make sure there
is no debris inside. See your dealer if there is still a problem or you suspect
a problem with the pump.

IMPORTANT
DO NOT discharge oil or cleaners into the water. Refer to Section 1, OUR ENVIRONMENT,
Fuel/Oil Spillage. Bilge pumps and bilge pumping systems are not designed for damage
control. Check the function of all bilge pumps at regular intervals. Continuous operation of
the bilge can mean a leak or a drain plug installed incorrectly. Make sure all drain plugs are
installed. See your Tigé Dealer if you have any questions.

EXTERIOR

Use quality boat care product when protecting the exterior of your Tigé boat.
The exterior of your boat is as important as protecting the engine. A little
effort today will keep your boat looking good in the future and show the pride
every time you use your boat.

!

WARNING

SLIPPERY SURFACE HAZARD

Cleaning craft surfaces can generate slippery conditions which can result in
death or serious injury. Use caution when cleaning with detergents and rinse
thoroughly.

!

WARNING

FIRE/EXPLOSION/ASPHYXIATION HAZARD

Cleaning agents and paint ingredients can be flammable and/or explosive, or
dangerous to inhale. Make sure ventilation is adequate, wear proper
personal protection and dispose of rags properly ashore.

Vapors from flammable solvents can cause fire, explosion or asphyxiation
resulting in death or serious injury. Keep open flame or spark away from
work area. DO NOT paint unless in a well-ventilated area.

7-7

«
...
71
72
73
74
75
...
»

Summary of Contents for Multi-sport Inboard Boat




























































































Reviews:

No comments

Related manuals for Multi-sport Inboard Boat

Brand: Lagoon Pages: 122

Brand: J Pages: 30

Brand: OVINGTON BOATS Pages: 19

R-29 Command Bridge

Brand: Ranger Tugs Pages: 21

Brand: PURSUIT Pages: 148

Brand: Johnson Outdoors Pages: 8

Brand: Prestige Pages: 112

Brand: Ockelbo Pages: 70

ST70 Instrument

Brand: Raymarine Pages: 42

Brand: Grand Pages: 19

Brand: Ockelbo Pages: 64

Serene Splash SLBBFL2

Brand: SereneLife Pages: 8

1994 Maristar 200

Brand: MasterCraft Pages: 58

Brand: Nautiraid Pages: 14

Brand: Sea-doo Pages: 557

Brand: Ship Harbor Yacht Charters Pages: 11

Brand: Cruisers Yachts Pages: 58

460 Express Series

Brand: Cruisers Yachts Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands