Tiffin Motorhomes 2015 Phaeton, Owner'S Manual, Page: 80 / 158

73
SLIDE-OUT FEATURES
RETRACTING THE SLIDE-OUT ROOM
1. Before attempting to move the motorhome, the slide-out room must be fully retracted.
2. Verify that the 12 VDC system is fully charged and connected to the electrical system.
3. Make sure all personal equipment and any children are away from the slide-out.
4. Make sure all cabinet doors around the slide-out areas are closed.
5. Push the “in” section of the switch; allow the slide-out room to go to its fully retracted
position.
6.. Release the switch (this locks the room into position).
NOTICE
If the slide-out room doesn’t move when the switch is depressed,
check the following:
• Make sure the ignition system is turned “on.”
• Make sure the park brake is engaged.
• Make sure the battery is fully charged and connected.
• Make sure the slide-out breakers haven’t been “tripped.”
These are located in the storage box with the inverter or converter.