TieYak.com
Page 4
06/19
Assembly
Attaching Cross
-
Bar
1.
Hold assembled
Cross
-
Bar
about
halfway up the towers.
2.
Insert two
2
-
3/4” Hex Bolts
with
Washer
through each END of
Cross
-
Bar into each frame, and
through the
Cross
-
Bar Plate
on the
other side of Post using
Hex Bolt
,
Washer
,
Cross
-
Bar Plate
,
Washer
and
Lock Nut
.
Repeat for second tower.
Arm to Frame Assembly
1.
First set of
Arms
are attached at the
lowest position on the front side of Frames
using
3
-
1/2” Hex Bolts
,
Washers
and
Lock
Nut
.
2.
Attach second set of Arms at the highest
position on the front side of Frames using
3
-
1/2” Hex Bolts
,
Washers
and
Lock Nut
.
Parts Needed
Parts Needed
Washer (8)
Plate (2)
Lock Nut (4)
3
-
1/2”Hex Bolt (8)
Lock Nut (8)
Post
Arm
2
-
3/4” Hex Bolts (4)
Arm (4)
For technical assistance or replacement parts: Call 866.787.7369
Washer (16)
Warranty:
TieYak® products are warranted to the original owner against defects in material and workmanship
when used for its intended purpose under normal use and conditions for one year. It is at the discretion
of TieYak® to repair or replace any defective product.