30
Note:
Accumulators were only shortly charged by the
manufacturer. Before the first initial startup the akku
should be charged for 14 hours . Full capacitance of
NiMH accumulators ist first reached after 2 - 3 cycles
of charging and discharging.
(BAT symbol = maximum half box)
The accumulator suffers damages with frequent
supercharging.
7. Maintenance
7.1 General information
The VarioSafe is absolutely mainteinance-free. Never-
theless, observe the following information in order
to maintain safe operation: Always keep the voltage
tester dry and clean. The housing can be cleaned with
a cloth dampened with isopropyl (alcohol) or soapy
water.
7.2 Repeated inspection
We recommend a repeated inspection at least ervery
6 years. Depending on operation conditions and
frequency, a previous inspection may be recommen-
dable.
The serial number with the date of manufacturing
(WWYYNN=
W
eek
Y
ear
N
umber) is imprinted on the
backside of the device. Repeated inspections are
offered by the manufacturer and indicated by the
inspection plate.
8. Repair
Repairing is only allowed by the manufacturer or
explicitly authorised repair shops.
In case of damages at the VarioSafe EXM 25, in case
of failure of the function test according to section
3.2 or for a detailed inspection and calibration
please contact:
or send the device back to the manufacturer
(address see page 1) with a description of failure.
9. Limited warranty and limitation of liability
By continuous quality checks and production
controls, most modern electronics and high quality
materials we guarantee that the tester will be free
from defects in material and workmanship for two
years.
This warranty does not cover batteries, improper
handling, not intended purpose, opening the hou-
sing, improper storage or damages from accidents.
No other warranties such as fitness for a particular
purpose will be given.
We are not liable for any indirect, incidental or
consequential damages or losses arising from any
cause or theory.
