SOFTENER
VALVE
FILTER
VALVE
SERVICE
2.0s
BRINE
2.0s
M. RATIO
5.714
BACKWASH
2.0s
RINSE
2.0s
REFILL
2.0s
VALVE TYPE
The valve must be designated as either SOFTENER or FILTER. This change will determine
what options are available in the Factory Settings.
METER RATIO
The meter ratio calibrates the pulse from the flow meter into gallons. This value is factory
set and should not be changed.
DELAY SETTINGS
The delay settings are used to precisely stop the motor / piston in the correct position. This
value is factory set and should not be changed.
MASTER PROGRAMMING
MASTER OPTIONS (LEVEL III)
Press
SETTINGS
key UP or DOWN key
Hold until you a beep (3 seconds).
Press
UP
or
DOWN
key
to advance each page.
Press
SETTINGS
key to initiate a change.
Press
UP
or
DOWN
key
to change value.
Press
SETTINGS
key to accept value. Press UP or DOWN key
to advance to next
page.
CAUTION:
The values in this page are for
illustration purpose and can be
changed by the factory without
notice. Please contact Customer
Service to confirm proper settings.
23
