13
STARTUP INSTRUCTIONS
TIME
05:22 PM
Sample
Connection
Sample
Connection
SERVICE
Sample
Connection
Sample
Connection
SERVICE
BYPASS
MANUAL REGEN
Delay
Immediate
BACKWASH
IIIIIIIIIIIIIII 15 Minutes
BRINE DRAW
IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII 50 Minutes
BACKWASH
BRINE DRAW
RINSE (SKIP)
REFILL (SKIP)
Regen Sequence
- Once in Regeneration, the cycle can be skipped by pressing any button.
The controller will
show the following on
the screen - Time,
Date and number of
Days Remaining for
Regeneration.
1. Connect the Transformer to the Valve
Plug the 12-volt transformer into a 120 VAC 60 Hz outlet.
2. Screen Display
Familiarize with Button
Configuration:
3. Manually Regenerate the Valve
Manually index the valve with the control knob to BA.WA. or press
SET
and hold display will come up showing
delay flashing press
Up
and
Down
Arrows
to immediate and press
MENU
to initiate a manual
regeneration. Once the valve is in the Backwash position please unplug.
This function is to enter the basic set up information
required at the time of installation.
This function is to accept the values if changed and
advance to the next page in the menu.
These buttons are used to increase or decrease the value
of the settings while in the programming mode.
Key Pad Configuration:
