TiePie Handyscope HS4, User Manual

Page: 16 / 32

Figure 4.1: Driver install: step 1
When drivers were already installed, the install utility will remove them before in-
stalling the new driver. To remove the old driver successfully,
it is essential that
the Handyscope HS4 is disconnected from the computer prior to starting the
driver install utility. When the Handyscope HS4 is used with an external power
supply, this must be disconnected too.
Clicking ” Install ” will remove existing drivers and install the new driver. A remove
entry for the new driver is added to the software applet in the Windows control
panel.
Figure 4.2: Driver install: Copying files
12
Chapter 4