8
NEO HD
1. Insert the SDHC card into the SD card slot like the left image. In case that the
SDHC card is compulsorily inserted unlike the left image, damages will happen in
SDHC card and the product.
2. Assemble the bracket with the main body.
3. The screw of bracket locates in the left side from the over view.
4. Assign the place on the windshield, on which the product is installed.
Before the installation, please clean off the dirty and the humidity on the
windshield.
If possible, please install the product behind the middle position of the rear-view
mirror to protect from interfering with a driver’s sight view.
5. Remove the protection cover from the adhesive bracket and loosen the screw
of the mounting bracket slightly loosen to adjust the mounting angle.
6. Firmly press the mounting bracket combined with the product onto the
suitable place of the windshield. Hold for 3 seconds to secure.
7. Tighten the screw of the mounting bracket with the coin. Tighten screw to
secure mounting position, Road view camera’s angle should be adjusted in
accordance with the windshield’s tilt.
8. Put the power cable in order with the cable fix holder.
9. Plug in the car adapter to the product and into the cigarette lighter to power
up.
10. Product takes 30 seconds to start up. It starts recording with a beep. During
normal operation, REC LED will always be on.
11. Connect the mini-jack from the video cable into the Monitor port on the side.
Installation
Summary of Contents for HD
Page 1: ...USER S MANUAL ...
