7
User’s Manual
1.
Please insert the SDHC card into the product.
2.
Please combine the NEO HD main body and the bracket.
3.
Please assign the proper place of the windshield behind
the room mirror and clean up the humidity and dirty on it
with the dry fabric.
4.
Please remove the protection cover the adhesive tape of
the bracket.
5.
After attaching the bracket on the windshield and fix the
screw of the bracket with the coin.
6.
Please connect the power cable with NEO HD and tie up
the power cable.
7.
Please start the drive and use the product(Keeping REC
LED light on means the normal operation).
8.
Please remove SDHC card after turning off the product
and check the recorded data in the exclusive viewer in PC.
Caution
When you install the product, please stop driving and park the
vehicle at the safe place
First connect the product to the power outlet then turn on it.
Only use the supplied power cable(DC 12V~24V).
Please clean up the windshield where the product is attached
on NEO HD. The dirty and the humidity can make the product
dropped from the windshield.
Easy Installation
Summary of Contents for HD
Page 1: ...USER S MANUAL ...
