MODEL 1601 SERIES COFFEE BREWER
COMPONENT MAINTENANCE MANUAL
WITH ILLUSTRATED PARTS LIST
25-30-27
Page 304
September 1, 2005
4. On Models 1601B coffee brewers ONLY, remove the three (3) remaining
screws (265).
5. On Models 1601B coffee brewers ONLY, remove the thermostat mounting
plate (240). Remove the overheat thermostat (245A) from mounting plate by
removing locknuts (255).
6. Remove tray (225) and gasket (230) from chassis (5).
E. 1601A Heater Disassembly (Figure 1003)
1. Remove screws (20) and washer (25) from heater casting (5). Remove
overheat thermostat (3).
2. Remove screws (40) and washer (45) from heater casting (1\5). Remove
control thermostat (40).
NOTE:
Heater elements (50) are staked in place and should not be removed
except for replacement of a failed element.
F. 1601B Heater Disassembly (Figure 1003)
A. Remove screw (40) and washer (45) from heater casting (5). Remove control
thermostat (30).
NOTE:
Heater elements (50) are staked in place and should not be removed
except for replacement of a failed element.
