19
Thuraya T2M-DUAL
TABLE 14 ANALOG COEFFICIENT
Item
Set Value
Example
Speed
1~ 99999
4-pulse: 2548
8-pulse: 5096
16-puse : 10192
RPM
1~ 99999
30
Brake
High / Low
4.11 J1939 CAN DATA
T2M-DUAL supports J1939 CAN specifications.
Below table shows the CAN support data based on J1939 specifications. (It can vary by
vehicle manufacturer and manufacturing year)
TABLE 15 J1939 CAN DATA
No
Item
Description
Unit
1
Fuel Level
Ratio of volume of fuel to the total volume of fuel storage
container.
%
2
Engine Speed (RPM)
Actual engine speed which is calculated over a minimum
crankshaft angle of 720 degrees divided by the number of
cylinders.
RPM
3
Engine Hours
Engine total hours of Operation: Accumulated time of
operation of engine.
Hour
4
High Resolution total
vehicle distance
Accumulated distance travelled by the vehicle during its
operation.
Meter
5
Engine Coolant
temperature
Temperature of liquid found in engine cooling system.
ºC
6
Ambient Temperature
Ambient Air Temperature: Temperature of air surrounding
vehicle.
ºC
7
Fuel Rate
Amount of fuel consumed by engine per unit of time
L/h
8
Instantaneous
Fuel Economy
Current fuel economy at current vehicle velocity
Km/L
9
Wheel based speed
Speed of the vehicle as calculated from wheel or tail shaft speed Km/h
10
Brake Switch
Switch signal which indicates that the driver operated brake
foot pedal which is being pressed. This brake foot pedal is
controlling the vehicles’ service brake (total vehicle braking
application, not parking brakes).
on/off
11
Accelerator
Pedal Position
The ratio of actual position of the analogue engine speed/
torque request input device (such as an accelerator pedal or
throttle lever) to the maximum position of the input device.
%
12
Current Gear
The gear currently engaged in the transmission or the last
gear engaged while the transmission is in the process of
shifting to the new or selected gear.
-
