Thuraya IP Commander, Operating Instructions Manual

Page: 26 / 26

2. Install Your New IP Commander System
16
4), press one of the keypad combinations as shown below, followed by presing the Send
(OK) button. For example, to reboot the
Thuraya IP Commander
, press the
#
key three
times, followed by the number 7 , or ###7 , and Send (OK).
Command Function
General Function
###V (###8 on keypad) Switchfrom IP Modeto Voice Mode
###G (###4 on keypad) Enter GmPRS Mode(not currently available)
###D (###3 on keypad) Switchfrom Voice Modeto Data, Standard Mode, Auto Connect
(IP Mode)
###R (###7 on keypad) Reboot Thuraya IP Commander
Change Modes (Quick Boot)
###3 DataStandardMode
###31 DataProfile1
###32 DataProfile2
###33 DataProfile3
###34 DataProfile4
Start and Stop PDP context (billable data)
###2
Toggleactivate/deactivate
###20 Deactivate
###21 Activate
Table 4: Remote Control Thuraya IP Commander from Handset
Handset Status Display
Profile and Status (+ active/- inactive/* streaming)
E.g
. UAE-D1+ indicates profile 1 is active and it is not streaming
E.g. UAE-D3* indicates profile 3 is active and it is streaming
E.g. UAE-D4- indicates profile 4 is selected but it is not active