5
INCLUDED IN THE BOX
JUMP STARTING INSTRUCTIONS
Jump Starting 12V Vehicles
1. Connect the blue plug to the unit and make sure the cable
indicator is off. The plug must be fully seated into the host.
2. Connect the red clamp to the positive (+) battery terminal,
and the black clamp to the negative (-) battery terminal.
3. Start the vehicle.
4. When the vehicle has been jump started, remove the jumper cable from the vehicle
and leave the engine running.
BOOST
reverse
correct
BOOST
reverse
correct
CABLE INDICATOR INSTRUCTIONS
Green
light on
Telling the connection is correct and the circuit
is working, you can turn on the engine to
jump-start directly.
Red light on
with buzzing
noise
The connection is incorrect. Check you’ve attached
the clamps to the correct terminals. Wait unit the
green light is on to turn on the engine.
Green light
blinking
with buzzing
noise
The vehicle battery is low. Press the BOOST button,
wait until the green light becomes solid, then turn
on the engine within 30 seconds.
No lights
on and no
buzzing
noise
The vehicle’s battery maybe damaged. Confirm the
clamp connection is correct. If so, press the BOOST
button, wait until the green light is on, and then turn
on the engine within 30 seconds.
Beep Beep
Beep Beep
Beep Beep
Beep Beep
Beep Beep
Beep Beep
Beep Beep
Beep Beep
