2
1. Read the instruction manual carefully before using this unit.
2. Jump start for 12V vehicles only. Do not use on other sized vehicles.
3. Exercise caution while using this unit.
4. Only use the jumper cable provided with this unit.
5. Make sure the blue plug of the jumper cable is plugged fully into jumping socket,
otherwise, the blue plug will melt.
6. Make sure to check all the battery connections are clean before jump starting. Make
sure the battery clamps are well connected. If the battery terminals on the vehicle are
dirty or corroded, the unit will not work at the intended power.
7. Remove the product from the vehicle battery within 30 seconds of jump starting. If not,
it could lead to damage to your car.
8. Only jump start when 3 to 4 battery indicator lights are illuminated.
9. When working with batteries make sure someone is within range of your voice to come
to your aid.
10. Remove personal metal items such as rings, bracelets, necklaces when using a jump starter.
11. Charge only at ambient temperature between 0°C and 60°C.
12. Charge only using the charger provided with this unit.
13. If this unit is leaking liquid dispose of at proper recycle facility immediately.
14. Under extreme conditions, battery leakage can occur. If a liquid is noticed coming from
the unit do not handle with bare hands. In case of skin contact wash with soap and
water immediately. If liquid comes in contact with eyes, rinse eyes with cold running
water for at least 10 minutes and get medical attention immediately.
15. Product contains lithium based battery. At the end of product life dispose of it according
to local regulation.
16. Do NOT use this unit if any cable clamp or cord is damaged.
17. Do NOT use in place of a vehicle battery.
18. Do NOT use as a battery charger.
19. Do NOT leave the unit on car battery after starting the car successfully.
20. Do NOT jump start more than 3 times in a row. It could damage the unit by overheating.
Give two minutes between attempts. The jumping cable can become overheated and
detach as a safety measure.
21. Do NOT connect the two clamps together.
IMPORTANT SAFETY WARNINGS
