-16-
TAIL ROTOR SYSTEM /
尾旋翼機構組裝
Bag L
Secure all screws shown on this page with a drop of thredlocker.
本頁顯示之螺絲請使用適量防鬆膠鎖固。
HME3-3B
SET SCREW M3×3
無頭內六角螺絲
M3×3
HNU2-9Z
SHOULDERED SCREW M2×9
圓頭十字軸套螺絲
M2×9
No.
3
4
Qty
1
2
Material No.
BK1501
HSA2-6
Description
3D CARBON TAIL FIN
BUTTON HEAD SOCKET SCREW, M2X6
名稱
3D
碳纖維垂直安定面
半圓頭內六角螺絲
No.
1
2
Qty
1
2
Material No.
HME3-3B
HNU2-9Z
Description
SET SCREW M3×3
SHOULDERED SCREW M2×9
名稱
無頭內六角螺絲
M3×3
圓頭十字軸套螺絲
M2×9
Ensure smooth, non-binding
movement when assembling
確認組件靈活度
HSA2-6
BUTTON HEAD SOCKET SCREW, M2X6
半圓頭內六角螺絲
(4)
Step 3 /
步驟三
Attach the Carbon Tail Fin to the Tail Unit as shown.
將碳纖垂直安定翼固定於尾管座。
Completed View
組裝完成
(3)
(1)
(2)
Step 2 /
步驟二
Fit the Tail Pitch Control Links to the Tail Pitch Control
Set. Do not over tighten the Socket Screw and ensure
the tail linkages run effortlessly.
將控制連桿與控制臂連接，請使用適量螺絲防鬆劑，勿過度鎖
緊固定螺絲，並確認機構可以靈活作動。
Step 1 /
步驟一
1. Slide the tail rotor set into the Tail Rotor Shaft.
Line the hole up with the concave on the shaft.
2. Secure the tail rotor set tightly by the Set
Screw with a drop of threadlocker.
1. 將組裝完成的尾舵控制臂與夾片組安裝至尾橫軸。
2. 無頭內六角螺絲需準確安裝於尾橫軸固定孔位，並
使用防鬆膠。
T22
T22
T22
(2)
Line up the concave of tail rotor
shaft and the hole of hub.
尾橫軸上凹槽對正轉座上螺絲孔。