SPEED CONTROLLER
FOR BRUSHLESS MOTOR
ELECTRIC SPEED CONTROLLER
11
IMPORTANT! Please center all the trim knobs in the
netural position and calibrate the throttle range of your
transmitter before boating. Always transmitter power
on first RX last.
(pull the trigger if pis tol ra dio is used).
If there is an alert tone "beep-beep-beep-beep.....",
That means the controller does not recognize the
high point. You will need to switch off all devices
then re-start the setting procedure. Suggest to
trim the throttle ATV knob (high end position) at
least over the center point and pull the trigger all
the way to the end point(pistol type) or move the
throttle stick to the highest position then "beep-
beep-" tone should be emitted.
Move throttle stick to the bottom position (keep the
trigger in the neutral position if pistol radio is used),
several
beep
tones should be emitted to the
present the numbers of battery cells.
Keep the trigger in the neutral position then switch
on the transmitter.
Summary of Contents for Desperago Jr. 5126
Page 10: ...10 MOTOR F F No 2375 OBL 29 19 15M...
Page 12: ...12 SPEED CONTROLLER...
