background image

2

Table of Contents

Introduction

Pre-Assembly Notes 

....................3

Other Items Required 

..............3

Tools and Supplies Needed

.......3

Part Drawings 

....................................4

Assembly

Wing 

................................................5

Tail 

................................................6

Fuselage 

.......................................7

Servo 

...................................8

First Flights

Balancing 

........................................11

Operation Checks 

...........................12

Flying 

..............................................14

Repair 

....................................................16

INTRODUCTION

All of us at Thunder Tiger want to thank you for choosing the Super Cub EP park flyer.  This kit has been

engineered to go together quickly and easily while still providing you with great looks and exceptional flying

performance. In order to insure that your assembly process will be as smooth and uneventful as possible, we

strongly suggest that you read this assembly manual thoroughly before beginning to assemble this kit. We are

confident that you will enjoy flying this Super Cub and it will provide a lot of rewarding flights.

Thunder Tiger guarantees that you should enjoy the trouble free use from our R/C products.  Thunder Tiger

products have been sold worldwide through the authorized distributors that are supported directly and rapidly

from Thunder Tiger.  You may find that Thunder Tiger is always pursuing to explore new items creatively with

highest quality.  To update the latest product information and to get the best technical support, please fee free to

contact your local hobby shops or Thunder Tiger authorized distributor. 

Modeling Organizations

The Super Cub EP park flyer is a serious radio-controlled model airplane.

You should obtain help with the

airplane for preflight and flight trainning from an experience pilot to insure maximum enjoyment. Many programs

are very willing to help, check www.modelaircraft.org . Also, it is recommended that you join one the following

organizations. They can help you find a club in your area plus offer insurance programs to protect you.

Super Cub

Academy of Model Aeronautics

5151 East Memorial Dr.Muncie, IN 47302

800-435-9262    Fax 765-741-0057

www.modelaircraft.org

Sport Flyers of America

POB 7993 Haledon, NJ 07508

800-745-3597    Fax 973-305-6686

www.modelavaiton.com

Summary of Contents for 4315-Y

















Reviews: