Thumpstar ATV 125CC, Owner'S Manual

Page: 22 / 182

15
Pre-Operation Checks
FUEL
Make sure that there is sufficient fuel in the tank.
ENGINE OIL
Make sure that the engine oil is at the specified level. Add oil as necessary.
RADIATOR
Check the cooling fluid level if your ATV is water cooled engine, add fluid
if necessary. If add cooling liquid to full, start engine idle speed running,
The liquid level will decline, then add the liquid gradually to full.
FRONT AND REAR BRAKES
Brake lever and brake pedal
• Check that there is no free play in the brake lever. If there is free
play, have a dealer check the brake system.
• Check for correct brake pedal height. If the pedal height is incor-
rect, have a dealer adjust it.
• Check the operation of the lever and pedal. They should move
smoothly and there should be a firm feeling when the brakes are
applied. If not, have a dealer check the brake system.
BRAKE FLUID LEVEL
Check the brake fluid level. Add fluid if necessary.
BRAKE FLUID LEAKAGE
Check to see if any brake fluid is leaking out of the pipe joints or brake
fluid reservoirs. Apply the brakes firmly for one minute. If there is any
leakage, have a dealer check the brake system.
BRAKE OPERATION
Test the brakes at slow speed after starting out to make sure they are work-
ing properly. If the brakes do not provide proper braking performance,
check the brake pads for wear.