Thumpstar ATV 125CC Owner'S Manual Download Page 179

Page: 179 / 182

172

Warranty

WARRANTY TERMS AND CONDITIONS

The Limited Warranty starts from the date of purchase of the new mo-

torcycle by the customer. Thumpstar will cover PARTS AND FREIGHT

ONLY. Thumpstar does not cover the labor required to remove or repair

the motorcycle or part for warranty repair or replacement. (Unless other-

wise negotiated) In some cases, replacement parts may have to be shipped

from overseas and can take up to 8 weeks for delivery.

Purchasing a motorcycle in the crate without setup by a Thumpstar Autho-

rized Dealer void the limited warranty.

Limited Warranty is not transferable and if valid for original purchaser

only.

USA: Competition models are absence from a manufactures/limited war-

ranty.

WARRANTY CLAIMS

All warranty claims must be accompanied with the following information

and attachments:

– Picture of the motorcycle

– Picture of the problem

– Picture of the VIN number

– Engine faults require a picture of the engine number

– Description of the problem

To file a warranty claim, please visit your local Thumpstar website, which

is located in the footer of the website.

Summary of Contents for ATV 125CC






















































































































































































Search results

Summary of Contents for ATV 125CC

Reviews:

Brands by name

Popular brands

Thumpstar ATV 125CC, Owner'S Manual

Search results

Summary of Contents for ATV 125CC

Reviews:

Brands by name

Popular brands