Thump ATV110CC, Owner'S Manual

Page: 50 / 78

46
Cleaning Procedure
A thorough cleaning of your ATV is a necessary parts of Maintenance and
will help keep your ATV looking and performing its best, Proper cleaning
can also extend the life of your ATV.
It is important to clean and inspect your ATV after every ride if it used in
mud, brush, grass. water, salt water, or every dusty conditions
The buildup of mud, brush grass, ect., especially on the engine and exhaust
system. Can reduce engine cooling, conceal damage, or increase wear of
cenain parts, it is important to remove all debris during cleaning.
PREPARATION FOR CLEARING
Wash the ATV before any mud dries on the ATV.
Block or seal the end of the exhaust pipe using a piece of plastic wrap, cloth
rag or another method to prevent water from entering the engine.
High pressure washers can damage your ATV.
High pressure washers such as those found at coin—operated car washes
have enough pressure to damage the parts of your AT\/. It may cause rust,
corrosion and increase wear.
Do not sure high pressure washers to clean yourATV.
WASHING YOUR ATV
With some care, yourAV can be washed in a similar manner to washing an
automobile.
NOTE:
Avoid spraying or allowing water to flow over the following places:
Spark plug