3
Preliminaries
INTRODUCTION
This tiny but powerful camera is only thumb-sized but capable of
recording great video. The included accessory pack gives you lots of
mounting options for a variety of situations. Its size and light weight
make it perfect for carrying everywhere - just in case.
The camera may be used stand-alone or as a webcam when con-
nected to a suitable PC
The carton contains:
The camera
•
Three clip-on accessories
•
USB cable
•
When not in use the camera and the accessories should always be
•
left in the box for safe storage.
UNPACKING
Remove the camera carefully from packing. The camera is in a
•
protective see-through plastic wrap. We suggest you do not at-
tempt to remove the wrap as all camera features are accessible
with the case on. Unwrap and uncoil the USB cable.
CONNECTING THE MICRO SD CARD
You will need to purchase a micro SD card. The camera will not operate
without the card installed. The camera supports cards up to 32 GB.
Insert the micro SD card into the SD card
slot as shown. Press it gently home us-
ing your thumb nail on the outer edge.
To remove the card place your thumb
nail on the edge and push inwards gen-
tly. The card will now release and can be
easily removed.
If you operate the camera without an SD
card it will power off after 30 seconds.
CHARGING THE CAMERA BATTERY
Fully charge the built-in battery before using the camera
Connect the camera to a USB port on your PC using the USB cable
provided. You may also use a Mains- USB adaptor.
While charging, a solid red light will glow and a blue light will flash.
Once fully charged, both lights will remain lit indicating the camera
is ready for use.
Note:
when the battery power is low, the camera will enter protec-
tion mode and will not turn on until recharged.
