4
51100975 - B
1.2 instaLLinG the LoWer skiinG arMs
A.
Insert one of the lower skiing arms into a
VersaWing™. Make sure that the open end is
pointed upward. (See image 1)
B.
Line up the small hole on the top of the VersaWing™
with the hole in the lower skiing arm and insert the
retaining pin from the top pointing downward. (See
image 2)
C.
Swing the spring clip on the retaining pin down
around the back of the VersaWing™ and clip it over
the end of the retaining pin.
D.
Repeat for the other lower skiing arm.
E.
Verify that both of the lower skiing arms are securely
attached to the child carrier by giving them a sharp
pull away from the carrier.
F.
To remove the lower skiing arms; unclip the spring
clips from the retaining pins, pull the retaining pins
out of the VersaWings™ and pull the skiing arms out
of the VersaWings™. (See image 3)
2
1
3
WARNING
Always make sure that both of the security pins
of the lower skiing arms are properly inserted
and clipped in.
